Murphy’s Pub Draught clone

Murphy’s Pub Draught clone

(Murphy Brewery, Ltd., Ireland)

(5 gallons/19 L, all-grain)

Murphy’s Pub Draught

Ingredients

Step by Step

Treat water to about 150 ppm CaCO3. Heat 2.5 gallons (9.5 L) of strike water to 161 °F (72 °C). Mash in pale malt and crystal malt first, then stir dark grains into top layer of the grain bed. Mash at 150 °F (66 °G) for 60 minutes. Boil 90 minutes. Ferment at 70 °F (21 °C). Bottle with corn sugar or keg (and prefer­ably push beer with nitrogen mix).

(5 gallons/19 L, extract with grains)

Ingredients

Step by Step

In a large (8 qt./8 L) kitchen pot. steep crushed grains at 150 °F (66 °C) for 45 minutes in 3 qts. (~3 L) of water. While grains are steeping, heat 1.75 gallons (6.6 L) of water to 180 °F (82 °C). Scoop 2 qts (~2 L) of water from brewpot and add to «grain tea» in kitchen pot. Remove grain bag and place in colander over brewpot. Pour diluted “grain tea” through the bag, then discard grains. Bring liquid in brewpot to a boil, then stir in dried malt extract. Return to a boil, add hops and boil for 60 minutes. Add second charge of hops, liquid malt extract and sugar with 15 minutes left. Cool wort and transfer to fermenter. Add water to make 5 gallons (19 L) and aerate. Pitch yeast and ferment at 70 °F (21 °C). Bottle with corn sugar.

Exit mobile version